PDA

View Full Version : cb how to's - a to z info



irish1371
05-25-2009, 21:51
I signed up at right channel and they sent me some real nice how to's on cb's I hope they don't mind if I share but I figured someone in here probly has a question on how to tune an anteana ect so here are some links to different topics on cb's

enjoy

www.RightChannelRadios.com (http://www.rightchannelradios.com/)

library of articles via the following link

http://clicks.aweber.com/y/ct/?l=BhY2u&m=1l0JN9.XTQ0hPn&b=S6N7M79WEDy4VGNDSthOwQ (http://clicks.aweber.com/y/ct/?l=BhY2u&m=1l0JN9.XTQ0hPn&b=S6N7M79WEDy4VGNDSthOwQ)

Install issues

http://clicks.aweber.com/y/ct/?l=A1E2u&m=1mKdXmH2TZpxPn&b=9SgVZhAjiQyRpFpAT3eiDQ (http://clicks.aweber.com/y/ct/?l=A1E2u&m=1mKdXmH2TZpxPn&b=9SgVZhAjiQyRpFpAT3eiDQ)

(Choosing a CB Radio and Antenna)
http://clicks.aweber.com/y/ct/?l=A1E2u&m=1oiXIF5FTZpxPn&b=mZ4IA6l9YmXgutPs9Z6MNQ (http://clicks.aweber.com/y/ct/?l=A1E2u&m=1oiXIF5FTZpxPn&b=mZ4IA6l9YmXgutPs9Z6MNQ)

Trouble shooting
http://clicks.aweber.com/y/ct/?l=A1E2u&m=1kij0v8YTZpxPn&b=p1nWiOn9IHQ5g6CKiQor1A (http://clicks.aweber.com/y/ct/?l=A1E2u&m=1kij0v8YTZpxPn&b=p1nWiOn9IHQ5g6CKiQor1A)

I know its a bit ABC's but for beginners it helps and I picked up a few things out of it so its not too bad

I also have the driver side dash mount for my TJ I will post some pic's its handy for keeping a cb out of your leg room

HillBillE
05-25-2009, 22:17
Good info. Did you come across any wire diagrams for mikes? Last time out wheeling, my mike was acting up. Took it apart and found 3 wires broke at the plug.

And I can't tell which one goes where!:confused:

I may just buy a new mike, a noise cancelling one.

irish1371
05-25-2009, 23:03
hum no i have not but I think I can turn one up, I'll see what i can do

irish1371
05-26-2009, 16:13
anyone know of a cb the size of the cobra 19 compact that also has full scan and weather channels?

BIGTRUX
07-23-2009, 18:42
Cobra pin is 1Shield 2Audio 3Trans and 4 is recieve. worked in a CB shop for almost 4 years.

HillBillE
07-23-2009, 22:25
Cobra pin is 1Shield 2Audio 3Trans and 4 is recieve. worked in a CB shop for almost 4 years.

Thanks BIGTRUX! Any idea of which color wire goes to which pin?

The model I have has the channel changer buttons on the mike. I could care less if those work, as it easily gets bumped off channel while wheeling:D

I tried my other Cobra mike on it. It fit, but the channels just kept scanning:eek: