Forum: Tech Help

ok i hooked up my cb on friday and i made sure it worked tuned with swr meter down i got my swr down to 1.1 and tested with the jeep off worked...

So yesterday I went to go to work, turn the key and no start. Everything powers up but the starter won't kick over. I started digging into it after...

Okay, this might have come up in another thread but I didn't find it. Vehicle: 2004 Jeep Wrangler Rubicon Issue: I sent the Axle to get rebuild,...

Ok guys, i have read through the forums and can't really find anything on this - so here it is..last week i started noticing my 02 Wrangler having...

gotta '06 unlimited with 17K miles. seems like every time i push my clutch in when coming to a stop the engine rpms plummit way to low (around 250...

I'm a NEWB when it comes to axles... I'm about to score some d44's front and rear from an early f150... What am I going to have to do to put...

Alright so I was driving more short haul to work today and notice some pretty nasty sounding vibrations, grinding whatever. Checked all fluids....

:D OK, so that was about as catchy a title as I could think of... I am looking at SYE's from the various manufacturers out there. The "super...

I just rebuilt my front drive shaft to fix the "angry sparrows" issue I had. After fixing that problem I have a whole new mess to deal with. 1....

when im driving my TJ around the front dash turns off. cant tell how fast im going or high the rpms are. the gas gauge and oil gauges all turn off...

ok guys, gotta a problem...within the last few days my oil pressure has gone up..from driving around town it's normally at say 40, now it hovers at...

Ok I have a york compressor I am gonna use for onboard air but I dont have a pulley available to run it off of. I was thinking of running a pulley...

Jeeps an 05 rubicon with 42rle auto trans I had the code about 6 months ago, flushed the fluid, changed the filter and everythings been fine until...

I am looking at insalling a Tummy Tucker on my Jeep for added clearance. I have a 1" body lift, which I hear makes things easier. Does anyone have...

Looking for a winch plate for a 2010 Rubi. Have been quoted anywhere from 300 to 375,,,for just a plate!?!?! it will be combined with a fabtech...

Ok, So i am sure by now you are all getting sick of me looking for a winch. But I have a question that when answered might help me get a winch over...

So it's a 93 YJ, 4.0, ax15, 231. It doesn't have a body lift. The t-case lever shifts positively through all four positions. So here's the weirdness,...

This weekend my Jeep died on the trail. At first i thought the jeep had flooded. I was on even ground, but i thought perhaps i was running to rich....