They'll fit. You may have to lengthen your bump stops to keep from rubbing in your fenders, or trim fenders for extra clearance, or hi line, etc...
So I have a 99 TJ with a 4" Pro Comp MX6 lift I currently have 33"s on it and when the time comes I was thinking of getting a pair of big boy shoes the only thing is I don't know if they will fit and if so how well? Does anyone have a similar set up and if so how did it work out?
Thanks
James
99 TJ with more then a little done to it.
They'll fit. You may have to lengthen your bump stops to keep from rubbing in your fenders, or trim fenders for extra clearance, or hi line, etc...
they will fit i was running a 3" bds lift and 1" body with 35's just watch the fender flares i hit mine pretty easy
02 TJ 5.5 RK LA ,HD 44's f&R, 4.88, ARB's, 1"BL, 37" bfg km 2s, AA sye woods shaft, 2.5" custom catback, home built rocker guards & rear bumper, warn front, 1 ton steering setup, custom track bar
best bet is to get a 1" BL and you'll be good to go. What I did on my old 99 was remove the rear spring isolater, relocate the front 3/4" Spring isolaters to the rear and replaced the front with 1.75" Poly lift spacers. This with a 4" lift abd 1" BL and I fit 36's and could have done 37's
Jeepless Again
2008 Ford F150
they shoulf fit but you might have other issues like re gearing!
" if you can read this, thank a teacher.
If you are reading it in English, thank a Soldier"
I READ TODD DID
They will fit. I had the same lift when I jumped up to 35's. They will rub when offroad, but they will fit. They fit better with a RE LA
Get the MJ Supporter Membership
for a little less than $0.06 a day and
get more space, 2 MJ Stickers and no banners ads. [Check
it out] |
Bookmarks