Hey, Just posteing this for anyone trying to mount a winch on their stock JK. I ran across a few post on jk-forum where alot of guys are doing this, it cut's down on the cost of buying an expensive aftermarket bumper, and is quite a bit lighter if your concerned with weight issues in the front of your Jeep. Alot of the guys were making there own brackets, but you can buy this from Olympic Products and take out alot of the work, just cut a whole for the fairlead and mount it,...here's there mount (and it will sit between the frame rails, not up high.

http://www.quadratec.com/products/12001_0900_07.htm