I came up with the classic broken wire in the drivers door harness between the door and the body.
I noticed it because my drivers door lock button quit working on Sat. I can move the wire harness and get it to work so I know that is the problem.
Will try and get it fixed this week and take some pictures as I go.
I'm Mike, make sure you spell it right, because I do not want to get the wrong A$$hole in trouble.
If you do not have time to do it right the first time, how do you have time do do it over?
www.jeepforum.com michiganmaveric
took care of the broken wire in the door. It was the black wire, which I think is the ground for everything. There were only about 1 or 2 strands that were still intact. A little time, 1 butt splice and it is all better.
The orange and white wire has a cracked in the insulation, but no broken wire strands and I did not have another splice, so it will have to wait.
I'm Mike, make sure you spell it right, because I do not want to get the wrong A$$hole in trouble.
If you do not have time to do it right the first time, how do you have time do do it over?
www.jeepforum.com michiganmaveric
Get the MJ Supporter Membership
for a little less than $0.06 a day and
get more space, 2 MJ Stickers and no banners ads. [Check
it out] |
Bookmarks