there are a couple of guys out your way on mallcrawlin and JF in the grand section that have put ax-15s in thier grands. I think one guy even has a install step by step with a rebuild in it/
Anyone in the Color Springs know how to rebuild a ax 15 tranny? Think my syncro's are going out and it is driving me nuts. I would like to fix it before I grind the gears to hell. It's my only wheels right now.
Symptoms include: Grinding on high RPM shifts, and downshifts. Have to downshift at low speed to get it into lower gears, don't like to shift into low gears when stopped. Sometimes there is clutch slap(?) after backing up.
Parts Changed: Clutch, pressure plate, slave & master cylinder.
Any help would help.
there are a couple of guys out your way on mallcrawlin and JF in the grand section that have put ax-15s in thier grands. I think one guy even has a install step by step with a rebuild in it/
-Jeb
99 GC Ltd. V8. plenty of goodies, 6in lift 33s, rear locker, 12v cooler, steel bumpers fr+rr, Roof Top Tent,
01 TJ 4.0 auto.. stock street queen for now.
thanx.
before you rebuilt it snail do an oil change. the ax 15 is horrible when the fluids are old. go with amsoil, redline or royal brands it costs a hair more but it will be amazing as to the difference.
I got my jeep with 36k on it 1 owner before me. I could litterally not go into 2nd up shift or into 1st on a down shift. When cold- ferget aboutdit- grind me a new ratio.
I changed out the fluid and pow like new
I changed the fluids when I got it. Unfortunately, I was only able to get a Quaker State GL5 Synthetic. I just don't want to throw $40 in fluids in to find out it didn't help any. I guess that I could give it a shot though.
the ax 15 is also very picky about which oils you use in it![]()
"Some people wonder their whole lives if they will ever make a difference. Marines don't have that problem." Pres. Ronald Reagan
Army vs Marines = http://www.youtube.com/watch?v=_2M7ckkxQLU
when and who did the clutch job because that's what it sounds like could be the problem. it sounds like the clutch is not being fully ingaged
2012 kawasaki Teryx4
Sold-85 CJ7, 6 inch lift, siting on 36's, welded rear, lots of drain holes
Sold-93 YJ, 4.0,
I'll get the clutched checked. I forgot I started this. Sorry.
Try penzoil syncromesh. It was like night and day on mine
Charter Member Of The Gultch Gang
Team YJ Member
Get the MJ Supporter Membership
for a little less than $0.06 a day and
get more space, 2 MJ Stickers and no banners ads. [Check
it out] |
Bookmarks