Do you know Powder Coat Pricing?

[MurdaDock]

I am going to get these things powder coated and am looking for a round about estimate to expect. I probably will have them shipped to a powder coater and pick them up when I get back to the states. If you cannot see the pictures, it is Poison Spyder Front and Rear Bolt on Crusher Flares.Rear_Flares (1).jpgRear_Flares (2).jpgRear_Flares.jpgFront_Flares (2).jpgFront_Flares (1).jpg

Front_Flares.jpg

[91YEEPER]

not trying to derail the thread this early but i would recommend using regular paint. if you nick it up on the trail its alot easier to repair and it looks pretty bad to paint over it PC with regular paint.

[silverbullet]

^what he said. or you could have em line xed.

[metalcd]

buddy of mine just put those on his rig and used the spray can bed liner, looks good and easy to keep looking good.

[913]

I second the "paint it" option. It's what I am doing with the MetalCloaks for the JK. I am going to DP90 primer them and most likely topcoat them with a satin or flat black. Depending on the powdercoat, you might be able to rattle can touch-up and match pretty well. Linky

On a side note, I'll check with our powdercoater on Monday to see what he would charge to do the flares for you.

[Mr.RonGilbert]

Powder coating looks the best IMO - however if you take your time and do it right you can make rattle can look just as good. The impt thing is to get a good self etching primer, start with a clean surface and go from there. I did that with my PSC front bumper. RustOleum has a "hammered" series of paint finish and it looks damn good IMO - it will also hide any imperfections due to less than perfect application. It is also very easy to touch up.

9541558.jpg

[GOVT1911]

Local PC shop wanted almost 300 to PC my 60mm mortar, bipod and baseplate........I went with Krylon. LOL

[jafcb]

here is a price list i found for a local shop http://www.finaltouchpowdercoating.c...ruckprices.htm

[MurdaDock]

Awesome, thanks guys. I am considering Powdercoat because My Bumpers and Sliders are powdercoated with that rough texture. Rattlecanning would be easier but would it look "off" against the other stuff

[91YEEPER]

Awesome, thanks guys. I am considering Powdercoat because My Bumpers and Sliders are powdercoated with that rough texture. Rattlecanning would be easier but would it look "off" against the other stuff

jeesy petes man, if youd take it out and scratch it up alittle no one would ever notice. i think this is the first time ive ever heard a jeep owner complain about something colorwise being off. well other than cherokee drivers...