Looks good. That is pretty smart.
Last summer I felt a ton of heat coming off the inside of my hard top so I came up with this fast cheap fix.. In Florida we have a ton of heat and sunshine one day I all most burnt my hand on the inside of my roof. As I took down my windshield visor it was cool to the touch that is what gave me this idea!
Start with 3 jumbo windshield deflators.
Next cut them to the size you need two pieces for the tee tops, One piece for the passenger roof, and one piece for the rear.
Lay each piece over the area you would like to cover and cut out to fill the void where the thin roof is.
Than spray them with Rust-Oleum Plastic primer you pick the color! I used white.
Next Clean the surface with rubbing alcohol. I then use 3m two sided tape all around the border then a few small strips down in the middle and then the sides of that. Peel off the other side of the tape and start from one side and lay the cut piece that you painted in and press down to secure!
Repeat to all 4 pieces and your done! I have had them in for about 3 months now and no more heat beaming me in the head and the Jeep cools off fast now!
Driver side tee top.
Front tee tops.
Back seat top.
![]()
07 JKU. See my mods & Jeep in action @ http://www.aaof.us/jeep.htm
CEO of Black Sheep 4x4s http://www.blacksheep4x4s.org
https://www.facebook.com/blacksheep4x4sorg
Member of CCJ. White Jeep club Member #137,
Good idea...
that is a good idea when i get a hard top i will have to do that
thats pretty freakin' awsome
ii give you props for that one...
Get the MJ Supporter Membership
for a little less than $0.06 a day and
get more space, 2 MJ Stickers and no banners ads. [Check
it out] |
Bookmarks