Project slow build

[jeepNfool]

Well here is my new project.
97 TJ, Interior is in excellent condition. The majority of the build wont start until after I get back home.
Plans are as follows:
Chevy 6.0 SFI
GM 4L80E
Atlas 5.0
Dana 60 front w/ 5.38 and Detroit
GM 14b Rear w/ 5.38 and Detroit
4-link front and rear
Coilovers
108" wheel base (or as close as I can)
Hydro assist Steering
Comp cut rear and High line custom front fenders
Custom Cage
Custom center console with heater ducting to the rear.
Seats (undetermined) w/ 4 point harness
Autometer guages
Depending on funding or how bored I get with the build, it may get an underdrive of some sort.

[jeepNfool]

Here is my new bling....2004 6.0, with a 4L80E

[RnEmOvr]

should be fun,


and befor you ask i dont thinks its a clutch prob on why it wont move, lol

[crazy4ink]

looks like you have a great build plan laid out. What donor did the engine/tranny come out of? It looks like whoever pulled it took their time and didn't butcher the harness. Did you also get the ECM?

[XTRM-TJ]

N i c e

[jeepNfool]

looks like you have a great build plan laid out. What donor did the engine/tranny come out of? It looks like whoever pulled it took their time and didn't butcher the harness. Did you also get the ECM?

Came out of a 2004 Chevy 2500, and yes I got the ECM...there wasnt anything I didnt get..As for the harness, it is completely intact..they cut all the hoses and cooling lines though, and they cut the line for the electronic shift on the tcase(wont be using it anyways)....

[XTRM-TJ]

from a pick n pull or ?????

[jeepNfool]

from a pick n pull or ?????

Nope.....an individual...

[devildog4x4]

looks like a weekend project, might even be time for a BBQ & a .
Sounds like it will be a sweet unit when done.

[jeepNfool]

BBQ deffinately...dont drink, but would get some for the friends...weekend, not at all...