Bedliner Write Up

[Nunner]

I know there are a few of these already floating around, but I figured I'd share mine anyway. I decided to do a writeup after the tear down had already begun so a few pictures are out of order, but you'll be fine.

I've done this a few times with different products, this time went with the dupicolor liner, this is the second Jeep I've used it on, and it is my favorite, easiest to work with, not to rough, and has stood up.

We started in back.

Required Materials:


After pulling the carpet I decided to strip everything down bare:


Get to work you!



Everything all stripped down:


Next mask everything off:


First Coat:




Pretty much done besides some touch-up:

[Nunner]

Now the front, first pulled the seats, console, and wiring.



Strip all that crap:




Now lay down the liner:


And after the second coat and the dogs checking it out:

[sincitycj]

I've had the Duplicolor on mine for about 3 yrs and have been real happy so far. It's held up real well and I couldn't beat the price being as I got mine free. I love the spray cans for touch up.

[TheRenegade]

great info.
gonna remember that for when I re-do mine....(I used the $40 gal from WalMart)

[RescueJP]

i just did mine with the dupli color. Its awsome my only problem was it does not stick to the fenders very well

[dmaxjeep]

how thick is it and how did you put it in? spray, roll, throw it out of a bucket? folks got to know!

[sincitycj]

how thick is it and how did you put it in? spray, roll, throw it out of a bucket? folks got to know!

They make both roll on and spray. I used the spray to get into the corners and rolled on the rest. It came out pretty thick but I did 2 coats just in case. As for the fenders mine stuck as well as the rest of the tub.

[RescueJP]

i ment flairs

[dmaxjeep]

one thing i noticed about the pics is you have to start with a bunch of empties? interesting..

[Nunner]

how thick is it and how did you put it in? spray, roll, throw it out of a bucket? folks got to know!

I rolled as much as I possibly could for texture, then painted the rest with a brush. I did 2 coats, the first one as thick as I could then just a even second coat.