Reply With QuoteIf its anything like the one on my 95 I-6 there is a small tab on the bottom gently open it you can pry on it with a screw driver just dont put alot of press on it or you will brake the locking feature then just pull the electrical connector off.
Oil Pressure Sensor Plug
I have an 01 Cherokee with an I-6, 4.0. I think the oil pressure sending unit plug needs cleaned out (the one by the oil filter). Can anyone post instructions (preferably with good pictures) on how to get that connector undone? I dont want to break it fumbling with it. Thanks!
If its anything like the one on my 95 I-6 there is a small tab on the bottom gently open it you can pry on it with a screw driver just dont put alot of press on it or you will brake the locking feature then just pull the electrical connector off.
"If it Turns, Burns, Banks, and Rolls Crew Chiefs made it do it."
X2 mine is a 93 and I recently had to replace the oil pressure sensor (broke it changing my filter) really you shouldn't need a screwdriver. should just be able to pull it up with your fingers.Originally Posted by CrewDawg15/22
93 Cherokee Sport - Mine
09 Dodge Journey - ComNavWife's
Posting Permissions
Get the MJ Supporter Membership
for a little less than $0.06 a day and
get more space, 2 MJ Stickers and no banners ads. [Check
it out] |
Bookmarks