Don't know any off hand, used 4 wheel parts for a little bit then realized they were over priced!!! Did my own gears when I went down to 5.13. I would stick with a mom and pop place.
Does anyone know of a reputable mechanic that works on jeeps without charging an arm and a leg for the labor? My 98 Sport Wrangler is having problems with the clutch/gearbox. The tension in the clutch changed after I put it into 2nd gear and it popped out (sounded pretty bad when it popped out). I need to get it looked at ASAP because anytime I engage the clutch, I hear a high-pitched squealing like a loose belt. Any help would be greatly appreciated.
Don't know any off hand, used 4 wheel parts for a little bit then realized they were over priced!!! Did my own gears when I went down to 5.13. I would stick with a mom and pop place.
05 rubi, 5.5 RE, 5.13s
IF YOU AIN'T CAV.......
just curious was that your first time doin gears and if so how hard was it to do for a first timer. Im wanting to gear my yj.
1981 CJ7- 4in lift on 33's, Twin sticked dana300, aussied D30, Custom bumpers,Herced inside. Riddler covers.
RIPTrail-87yj 35MTR
76 cj- Team MJ Buggy
07 F150 "Tow Whore"- 2.5in auto spring, 33's, Full flomaster exhaust, K&N intake, Edge Programer
Sapper
yeah first time. It was an all day process started at 0900 and finish at 1600 Had a buddy do the backlash for me but it didn't take hime but a couple tries to get the shims right. I would definatley recommend having someone there that know what to do if you get in a tight spot
05 rubi, 5.5 RE, 5.13s
IF YOU AIN'T CAV.......
Crazy Ed's Performance. He is a vendor on this forum. Great guy and real easy to talk to. He doesn't talk down to you.
I always used Predator 4WD up on N. Nevada and they do great work.
Where is Crazy Ed's located?
crazy ed is between galley and omaha on valley. his shop is on the west side of the road.
97 ZJ Murdered Out! (SOLD), 5.5" Clayton L/A's front and rear, 242 swap, HP30 & 8.8 w/ 4.88's & Eaton ELocker's F/R, 35" Goodyear Wrangler MT/R's with Kevlar.
Grand Cherokee Owners
http://www.militaryjeepers.com/commu...php?groupid=44
Cool, I will have to check him out. I am lookin to line the outside of my jeep. I already lined the inside with herculiner. It turned out really well, now I am thinkin about having the entire outside done....
Get the MJ Supporter Membership
for a little less than $0.06 a day and
get more space, 2 MJ Stickers and no banners ads. [Check
it out] |
Bookmarks