User Tag List

Results 1 to 4 of 4

Thread: Quick Disconnect Issue?

  1. #1
    I gotta try that....... wow682's Avatar
    Join Date
    May 2009
    Location
    Essex Junction
    Posts
    145

    Branch
    Navy
    Status
    Serving
    Served
    2000 to Present

    Closest Installation

    Fort Ethan Allen
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Navy Quick Disconnect Issue?

    I just installed quick disconnects on my TJ. I was wondering where do I set the pins? I have a 4" lift and 1" body lift. I tried to set them at no holes showing, but I had to set 1 pin at 1 hole showing. The instructions have no holes for 4" and 1 hole on upper and lower for 6" lift. Will this cause issues with swaying or techinal issues later. I drove it on a rural road and couldn't fell anything wrong....
    Join the Service or move to some other country!!! Thanks to all that are servicing or have served in the Armed Forces.

    . [__]
    . (OIIIIO)
    . ())---o-())

  2. #2
    Newbie dirTJeep's Avatar
    Join Date
    Apr 2008
    Location
    Oklahoma City,OK
    Posts
    24

    Branch
    Air Force
    Status
    Serving
    Served
    2002 to Present

    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    I'm sure I fully understand your situation, but as long as your antisway bar is close to being parallel to the gound and each link is the same length you shouldn't have any issues.

  3. #3
    I gotta try that....... wow682's Avatar
    Join Date
    May 2009
    Location
    Essex Junction
    Posts
    145

    Branch
    Navy
    Status
    Serving
    Served
    2000 to Present

    Closest Installation

    Fort Ethan Allen
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    thanks, I hate not having good instructions with stuff.....I'm a aircraft mech...I'm use to having my pubs
    Join the Service or move to some other country!!! Thanks to all that are servicing or have served in the Armed Forces.

    . [__]
    . (OIIIIO)
    . ())---o-())

  4. #4
    darwinism at its best irish1371's Avatar
    Join Date
    Jun 2008
    Location
    St. George
    Posts
    1,333

    Branch
    Marine Corps
    Status
    Served
    Served
    1996 to 2002

    Closest Installation

    Yokota AB
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default

    when on level ground you want to set the disco's so the sway bar arms are about 10 deg above parallel. both disco should be about equal length or something is not right.

    setting them up on an uneven surface will really make things off from side to side
    "Some people wonder their whole lives if they will ever make a difference. Marines don't have that problem." Pres. Ronald Reagan
    Army vs Marines = http://www.youtube.com/watch?v=_2M7ckkxQLU

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the MJ Supporter Membership for a little less than $0.06 a day and get more space, 2 MJ Stickers and no banners ads. [Check it out]